Open Access Review Online First

Multiscale Strengthening of Fast-Growing Wood for Lightweight, High-Strength Structural Applications: From Cell-Wall Engineering to Reconstitution

Minting Lai1,2,3, Lamei Li1,2,3, Yixin Li1,2,3, Wanju Li1,2,3, Qiaoguang Li4, Guijun Xie1,2,3,*
1 Institute of Comprehensive Utilization of Forest Resources, Guangdong Academy of Forestry, Guangzhou, China
2 Guangdong Provincial Key Laboratory of Forest Silviculture, Protection and Utilization, Guangzhou, China
3 Key Laboratory of National Forestry and Grassland Administration on Ecosystem Conservation and Restoration in the Guangdong-Hong Kong-Macao Greater Bay Area, Guangzhou, China
4 College of Chemical and Materials Engineering, Zhongkai University of Agriculture and Engineering, Guangzhou, China
* Corresponding: [email protected]
Received 04 Aug 2026
Accepted 29 Oct 2026
Published Online 12 Nov 2026
Pages 1–24

Abstract

Fast-growing plantation woods, including poplar, Chinese fir, pine, and eucalyptus, are abundant and rapidly renewable resources. However, their low density, high porosity, and comparatively weak interpolymer interactions limit their direct use in demanding structural applications. This review examines recent strategies for upgrading fast-growing wood through cell-wall engineering and structural reconstitution, including partial delignification followed by thermo-hydro-mechanical densification, pressure-free self-densification, bottom-up reconstitution, scrimber-based assembly, and spatially programmed densification. The strengthening mechanisms are organized across four coupled length scales: molecular-scale hydrogen-bonding reconfiguration and cellulose crystallinity; cell-wall collapse and pore elimination; fibre-bundle alignment and microfibril-angle regulation; and interfacial bonding and bulk stress transfer. Rather than acting independently, these mechanisms jointly determine the balance among density, strength, toughness, dimensional stability, and functional performance. The review further discusses current challenges in comparing reported properties across studies, moisture-induced performance loss, scalable manufacturing, and life-cycle sustainability. Reported gains are large but scale-dependent: partial delignification with hot-pressing raises strength more than tenfold, self-densified and reconstituted woods reach tensile strengths of roughly 500–590 MPa, and thin delignified films exceed 340 MPa, yet these absolute gains come with densities roughly three times that of native wood and remain vulnerable to moisture-driven set-recovery. We conclude that establishing standardized testing and reporting practices, together with predictive multiscale models, will be essential for translating engineered fast-growing wood into reliable lightweight structural materials.

Keywords: Fast-growing wood; wood densification; delignification; cell-wall engineering; reconstituted wood; multiscale structure-property relationships; structural biomaterials

How to Cite this Article

Lai, M., Li, L., Li, Y., Li, W., Li, Q., & Xie, G. (2026). Multiscale Strengthening of Fast-Growing Wood for Lightweight, High-Strength Structural Applications: From Cell-Wall Engineering to Reconstitution. Materiale Plastice, 1–24. https://doi.org/10.37358/MP.X.X.090358
Lai M, Li L, Li Y, Li W, Li Q, Xie G. Multiscale Strengthening of Fast-Growing Wood for Lightweight, High-Strength Structural Applications: From Cell-Wall Engineering to Reconstitution. Materiale Plastice. 2026:1–24. doi: 10.37358/MP.X.X.090358
M. Lai, L. Li, Y. Li, W. Li, Q. Li, and G. Xie, "Multiscale Strengthening of Fast-Growing Wood for Lightweight, High-Strength Structural Applications: From Cell-Wall Engineering to Reconstitution,” Materiale Plastice, pp. 1–24, 2026. doi: 10.37358/MP.X.X.090358
✓ Copied to clipboard