ABOUT INDEXING EDITORIAL BOARD ARCHIVES AUTHOR GUIDELINES SUBMIT PAPER AUTHOR'S SUBSCRIPTIONS AUTHOR'S PAGE CONTACT
Materiale Plastice
Cite as: Mater. Plast.
https://doi.org/10.37358/Mat.Plast.1964

OSIM Nr. R102356
ISSN Print 0025-5289
ISSN Online 2668-8220
Journal Metrics
* Impact factor 2019: 1.517
* 5-Year IF: 1.179
* CiteScore: 2.4
* H index: 22
Materiale Plastice - Latest Issue

Latest Issue >>>
ARCHIVES
   Volume 57, 2020
   Volume 56, 2019
   Volume 55, 2018
   Volume 54, 2017
   Volume 53, 2016
   Volume 52, 2015
   Volume 51, 2014
   Volume 50, 2013
   Volume 49, 2012
   Volume 48, 2011
   Volume 47, 2010
   Volume 46, 2009
   Volume 45, 2008
   Volume 44, 2007
   Volume 43, 2006
   Volume 42, 2005
   Volume 41, 2004
   Volume 40, 2003
 
<<<< back

Materiale Plastice (Mater. Plast.), Year 2005, Volume 42, Issue 1,





Evaluation of the Mechanical Properties of Precipitated Polyurethane Films in Reactive Agents Medium


Abstract:
Segmented poly (ester-urethanes) elastomers based on poly (ethylene diethylene adipate) diols as a soft segment and aromatic diisocyanates in the hard segment were synthesized by a conventional method. The precipitated polyurethane films have been degraded after a limited exposure to reactive agents: 4,4’-methylenebis(phenyl isocyanate) epichlorohydrin and propylene oxide in benzene. The effects on mechanical properties of precipitated polyurethane films were found to be a measure of the degradation due to reactive agents. 4,4’-methylenebis(phenyl isocyanate) and propylene oxide had an increase in the hard segment content which was associated with increased hard domain crystallinity, hardness and improvement in mechanical properties. It is suggested that the superior mechanical performance may be related to interconnecting hard domain texture by cross-linking process. Theis study attempts to correlate the mechanical properties of the precipitated polyurethane films with the nature of the reactive agents. In all cases, the effect of reactive agents was to increase the ultimate tensile strain, except epichlorohydrin. Keywords: poly (ester urethanes) films, reactive agents, mechanical properties



Issue: 2005 Volume 42, Issue 1
Pages:
Creative Commons License
This article is published under the Creative Commons Attribution 4.0 International License
<<<< back
 
  Search Authors
Crossref Member Badge
 DOI  logo
 Gold Open Access | Source=http://www.plos.org/  | Author=art designer at PLoS
Creative Commons License