ABOUT INDEXING EDITORIAL BOARD ARCHIVES AUTHOR GUIDELINES SUBMIT PAPER AUTHOR'S SUBSCRIPTIONS AUTHOR'S PAGE CONTACT
Materiale Plastice
Cite as: Mater. Plast.
https://doi.org/10.37358/Mat.Plast.1964

OSIM Nr. R102356
ISSN Print 0025-5289
ISSN Online 2668-8220
Journal Metrics
* Impact factor 2019: 1.517
* 5-Year IF: 1.179
* CiteScore: 2.4
* H index: 22
Materiale Plastice - Latest Issue

Latest Issue >>>
ARCHIVES
   Volume 57, 2020
   Volume 56, 2019
   Volume 55, 2018
   Volume 54, 2017
   Volume 53, 2016
   Volume 52, 2015
   Volume 51, 2014
   Volume 50, 2013
   Volume 49, 2012
   Volume 48, 2011
   Volume 47, 2010
   Volume 46, 2009
   Volume 45, 2008
   Volume 44, 2007
   Volume 43, 2006
   Volume 42, 2005
   Volume 41, 2004
   Volume 40, 2003
 
<<<< back

Materiale Plastice (Mater. Plast.), Year 2015, Volume 52, Issue 1,





Cristina Stefana Miron-Borzan, Mircea Cristian Dudescu, Khalid Abd Elghany, Vasile Ceclan, Petru Berce Analysis of Mechanical Proprieties of Selective Laser Sintered Polyamide Parts Obtained on Different Equipment


Abstract:
In the last years, researches regarding the manufacture of polyamide parts using selective laser sintering process have developed increasingly more because of the advantages this materials offer. This paper was focused on a comparative study about the mechanical proprieties and surface roughness of parts manufactured by Selective Laser Sintering (SLS) from PA2200 powder. Tested parts were achieved on DTM Sinterstation 2000 Machine and EOS Formiga P 100 Machine. The results obtained lead to the conclusion that the mechanical proprieties obtained for the test parts made at 7,5W laser power on DTM Sinterstation 2000 Machine, are close to the results obtained for the test parts made at 30W on EOS Formiga P 100 Machine. Keywords: Polyamide, Selective Laser Sintered, mechanical proprieties, roughness



Issue: 2015 Volume 52, Issue 1
Pages:
Publication date: 2015/3/30
download pdf   Download Pdf Article
Creative Commons License
This article is published under the Creative Commons Attribution 4.0 International License
<<<< back
 
  Search Authors
Crossref Member Badge
 DOI  logo
 Gold Open Access | Source=http://www.plos.org/  | Author=art designer at PLoS
Creative Commons License