Evaluation of Dental Composite Resin Interface and Adhesion Using Laser Scanning Confocal Microscopy

Stan, Adrian Tudor; Vaduva, Adrian; Negrutiu, Meda Lavinia; Sinescu, Cosmin; Szuhanek, Camelia; Rogobete, Alexandru; Muntean, Danina; Talpos, Serban; Duma, Virgil Florin; Idorasi, Laura; Hajaj, Tareq; Rominu, Mihai

Adrian Tudor Stan, Adrian Vaduva, Meda Lavinia Negrutiu, Cosmin Sinescu, Camelia Szuhanek, Alexandru Rogobete, Danina Muntean, Serban Talpos, Virgil Florin Duma, Laura Idorasi, Tareq Hajaj, Mihai Rominu

Evaluation of Dental Composite Resin Interface and Adhesion Using Laser Scanning Confocal Microscopy

Abstract:
The aim of the study was to evaluate and to compare the interface and marginal leakage of dental composite resins using confocal laser scanning biological microscopy (CM). Ten class II cavities were prepared on the proximal surfaces of 10 extracted teeth, previously kept in 10% formalin to preserve the bonding properties of the tooth structures. Cavities were restored with dental composite resin using the ‘open sandwich’ technique and then assessed using CM. Open marginal adaptations at the interfaces inside the composite resins were identified. The results obtained with CM helped to eliminate and reduce the background information collected from a distance from the focal plane and allowed for the acquisition of serial optical sections from thick tooth specimens. In vitro assessments were thus made using CM on the teeth structure, regarding the occurrence of potential micro-leakages at the restoration interface.

Keywords:
dental interface; adhesion; dental composite; polymers; confocal microscopy

Issue: 2018 Volume 55, Issue 4

Pages: 541-544

Publication date: 2018/12/30

https://doi.org/10.37358/MP.18.4.5070

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
STAN, A.T., VADUVA, A., NEGRUTIU, M.L., SINESCU, C., SZUHANEK, C., ROGOBETE, A., MUNTEAN, D., TALPOS, S., DUMA, V.F., IDORASI, L., HAJAJ, T., ROMINU, M., Evaluation of Dental Composite Resin Interface and Adhesion Using Laser Scanning Confocal Microscopy, Mater. Plast., 55(4), 2018, 541-544. https://doi.org/10.37358/MP.18.4.5070

Vancouver
Stan AT, Vaduva A, Negrutiu ML, Sinescu C, Szuhanek C, Rogobete A, Muntean D, Talpos S, Duma VF, Idorasi L, Hajaj T, Rominu M. Evaluation of Dental Composite Resin Interface and Adhesion Using Laser Scanning Confocal Microscopy. Mater. Plast.[internet]. 2018 Dec;55(4):541-544. Available from: https://doi.org/10.37358/MP.18.4.5070

APA 6th edition
Stan, A.T., Vaduva, A., Negrutiu, M.L., Sinescu, C., Szuhanek, C., Rogobete, A.,... Rominu, M. (2018). Evaluation of Dental Composite Resin Interface and Adhesion Using Laser Scanning Confocal Microscopy. Materiale Plastice, 55(4), 541-544. https://doi.org/10.37358/MP.18.4.5070

Harvard
Stan, A.T., Vaduva, A., Negrutiu, M.L., Sinescu, C., Szuhanek, C., Rogobete, A., Muntean, D., Talpos, S., Duma, V.F., Idorasi, L., Hajaj, T., Rominu, M. (2018). 'Evaluation of Dental Composite Resin Interface and Adhesion Using Laser Scanning Confocal Microscopy', Materiale Plastice, 55(4), pp. 541-544. https://doi.org/10.37358/MP.18.4.5070

IEEE
A.T. Stan, A. Vaduva, M.L. Negrutiu, C. Sinescu, C. Szuhanek, A. Rogobete, D. Muntean, S. Talpos, V.F. Duma, L. Idorasi, T. Hajaj, M. Rominu, "Evaluation of Dental Composite Resin Interface and Adhesion Using Laser Scanning Confocal Microscopy". Materiale Plastice, vol. 55, no. 4, pp. 541-544, 2018. [online]. https://doi.org/10.37358/MP.18.4.5070

Text
Adrian Tudor Stan, Adrian Vaduva, Meda Lavinia Negrutiu, Cosmin Sinescu, Camelia Szuhanek, Alexandru Rogobete, Danina Muntean, Serban Talpos, Virgil Florin Duma, Laura Idorasi, Tareq Hajaj, Mihai Rominu,
Evaluation of Dental Composite Resin Interface and Adhesion Using Laser Scanning Confocal Microscopy,
Materiale Plastice,
Volume 55, Issue 4,
2018,
Pages 541-544,
ISSN 2668-8220,
https://doi.org/10.37358/MP.18.4.5070.
(https://revmaterialeplastice.ro/Articles.asp?ID=5070)
Keywords: dental interface; adhesion; dental composite; polymers; confocal microscopy

RIS
TY - JOUR
T1 - Evaluation of Dental Composite Resin Interface and Adhesion Using Laser Scanning Confocal Microscopy
A1 - Stan, Adrian Tudor
A2 - Vaduva, Adrian
A3 - Negrutiu, Meda Lavinia
A4 - Sinescu, Cosmin
A5 - Szuhanek, Camelia
A6 - Rogobete, Alexandru
A7 - Muntean, Danina
A8 - Talpos, Serban
A9 - Duma, Virgil Florin
A10 - Idorasi, Laura
A11 - Hajaj, Tareq
A12 - Rominu, Mihai
JF - Materiale Plastice
JO - Mater. Plast.
PB - Materiale Plastice SRL
SN - 2668-8220
Y1 - 2018
VL - 55
IS - 4
SP - 541
EP - 544
UR - https://doi.org/10.37358/MP.18.4.5070
KW - dental interface
KW - adhesion
KW - dental composite
KW - polymers
KW - confocal microscopy
ER -

BibTex
@article{MatPlast2018P541,
author = {Stan Adrian Tudor and Vaduva Adrian and Negrutiu Meda Lavinia and Sinescu Cosmin and Szuhanek Camelia and Rogobete Alexandru and Muntean Danina and Talpos Serban and Duma Virgil Florin and Idorasi Laura and Hajaj Tareq and Rominu Mihai},
title = {Evaluation of Dental Composite Resin Interface and Adhesion Using Laser Scanning Confocal Microscopy},
journal = {Materiale Plastice},
volume = {55},
number = {4},
pages = {541-544},
year = {2018},
issn = {2668-8220},
doi = {https://doi.org/10.37358/MP.18.4.5070},
url = {https://revmaterialeplastice.ro/Articles.asp?ID=5070}
}

Downloads number: 0

<<<< back

PUBLISHING SECTION

Author Guidelines

* Paper Drafting

* Paper Template (doc)

* Ethical Statement (doc)

* Paper Submission

* Author Payments

Ghidul Autorului (ro)

Submit Paper

Author's Page