Effect of Temperature and Moisture on the Tensile Properties of a TEPs-Modified Adhesive

Banea, Mariana D.; Silva, Lucas F.m. Da; Carbas, Ricardo; Barros, Silvio De

Mariana D. Banea, Lucas F.m. Da Silva, Ricardo Carbas, Silvio De Barros

Effect of Temperature and Moisture on the Tensile Properties of a TEPs-Modified Adhesive

Abstract:
The main factors that affect the strength of adhesive joints are the exposure to moist environments and high and/or low temperatures. The objective of this paper is to measure the water diffusion in adhesives modified with thermally expandable particles (TEPs) and assess the joint strength of water saturated modified adhesives. Bulk specimens were used to measure the diffusion coefficient of water in a TEPs-modified adhesive. The tensile data as a function of TEPs content, moisture uptake and temperature was measured. It was found that the presence of moisture and the temperature affect the mechanical properties of TEPs-modified adhesive. Further, a scanning electron microscope (SEM) analysis was performed in order to examine the fracture surfaces of the tensile specimens tested as a function of temperature and water uptake. SEM analysis showed that the absorbed moisture and temperature change the fracture mechanisms and the morphology of the specimens.

Keywords:
Thermally expandable particles (TEPs); structural adhesives; temperature; water uptake; tensile properties

Issue: 2018 Volume 55, Issue 4

Pages: 478-481

Publication date: 2018/12/30

https://doi.org/10.37358/MP.18.4.5057

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
BANEA, M.D., SILVA, L.F.D., CARBAS, R., BARROS, S.D., Effect of Temperature and Moisture on the Tensile Properties of a TEPs-Modified Adhesive, Mater. Plast., 55(4), 2018, 478-481. https://doi.org/10.37358/MP.18.4.5057

Vancouver
Banea MD, Silva LFD, Carbas R, Barros SD. Effect of Temperature and Moisture on the Tensile Properties of a TEPs-Modified Adhesive. Mater. Plast.[internet]. 2018 Dec;55(4):478-481. Available from: https://doi.org/10.37358/MP.18.4.5057

APA 6th edition
Banea, M.D., Silva, L.F.D., Carbas, R. & Barros, S.D. (2018). Effect of Temperature and Moisture on the Tensile Properties of a TEPs-Modified Adhesive. Materiale Plastice, 55(4), 478-481. https://doi.org/10.37358/MP.18.4.5057

Harvard
Banea, M.D., Silva, L.F.D., Carbas, R., Barros, S.D. (2018). 'Effect of Temperature and Moisture on the Tensile Properties of a TEPs-Modified Adhesive', Materiale Plastice, 55(4), pp. 478-481. https://doi.org/10.37358/MP.18.4.5057

IEEE
M.D. Banea, L.F.D. Silva, R. Carbas, S.D. Barros, "Effect of Temperature and Moisture on the Tensile Properties of a TEPs-Modified Adhesive". Materiale Plastice, vol. 55, no. 4, pp. 478-481, 2018. [online]. https://doi.org/10.37358/MP.18.4.5057

Text
Mariana D. Banea, Lucas F.m. Da Silva, Ricardo Carbas, Silvio De Barros,
Effect of Temperature and Moisture on the Tensile Properties of a TEPs-Modified Adhesive,
Materiale Plastice,
Volume 55, Issue 4,
2018,
Pages 478-481,
ISSN 2668-8220,
https://doi.org/10.37358/MP.18.4.5057.
(https://revmaterialeplastice.ro/Articles.asp?ID=5057)
Keywords: Thermally expandable particles (TEPs); structural adhesives; temperature; water uptake; tensile properties

RIS
TY - JOUR
T1 - Effect of Temperature and Moisture on the Tensile Properties of a TEPs-Modified Adhesive
A1 - Banea, Mariana D.
A2 - Silva, Lucas F.m. Da
A3 - Carbas, Ricardo
A4 - Barros, Silvio De
JF - Materiale Plastice
JO - Mater. Plast.
PB - Materiale Plastice SRL
SN - 2668-8220
Y1 - 2018
VL - 55
IS - 4
SP - 478
EP - 481
UR - https://doi.org/10.37358/MP.18.4.5057
KW - Thermally expandable particles (TEPs)
KW - structural adhesives
KW - temperature
KW - water uptake
KW - tensile properties
ER -

BibTex
@article{MatPlast2018P478,
author = {Banea Mariana D. and Silva Lucas F.m. Da and Carbas Ricardo and Barros Silvio De},
title = {Effect of Temperature and Moisture on the Tensile Properties of a TEPs-Modified Adhesive},
journal = {Materiale Plastice},
volume = {55},
number = {4},
pages = {478-481},
year = {2018},
issn = {2668-8220},
doi = {https://doi.org/10.37358/MP.18.4.5057},
url = {https://revmaterialeplastice.ro/Articles.asp?ID=5057}
}

Downloads number: 0

<<<< back

PUBLISHING SECTION

Author Guidelines

* Paper Drafting

* Paper Template (doc)

* Ethical Statement (doc)

* Paper Submission

* Author Payments

Ghidul Autorului (ro)

Submit Paper

Author's Page